topic Re: acs 5.0 0n 1120 appliance stopped booting in Network Access Control

acs 5.0 0n 1120 appliance stopped booting

idrisoye123 — Tue, 26 Mar 2019 00:28:55 GMT

I have an acs 5.0 running on Cisco 1120 appliance. It has worked for 2 years.

Suddenly, I discovered that user can no longer login with their credentials.

On close examination, when I console, the booting does not complete. Screen shot attached.

Please help me. thanks

Alex Pfeil — Fri, 11 May 2012 22:21:08 GMT

I would get on the phone right away with TAC

I would say it is a hardware issue if it won't boot

But it is impossible to say without anymore information

Hopefully you have a backup of the config

Thanks Alex

Sent from Cisco Technical Support iPhone App

idrisoye123 — Mon, 14 May 2012 18:10:47 GMT

Thanks for your quick response. Please I still need full help from you.

I later connected a monitor to the 1120 appliance, still booting was not completed.

The output displayed have been attached.

“We should all have the right to free speech and expression of opinions. Wisdom is knowing when, where, and how to use them”

Alex Pfeil — Mon, 14 May 2012 18:16:10 GMT

I would still lean towards a hardware issue. This would be something that Cisco TAC would have to help you with.

Thanks,

Alex