topic Re: ISE Admin node Replication error in Network Access Control

ISE Admin node Replication error

Rafael Mendes — Mon, 11 Mar 2019 03:13:13 GMT

Hello Everyone,

I receive this alarm some times:

Alarm

Occurred At:	Wed Mar 20 09:20:10 BRT 2013
Cause:	Replication Stopped
Details:	Replication Stopped for the host PANVMGP3301B(Secundary Admin node)

Today i go to Administration -> System -> Deplyment and i can see my secundary Admin/Monitoring node with status "REPLICATION DISABLED" see the attach image.

I can force the sync for the Primary and Secundary Admin Nodes? How i can fix this?

Tks!

ISE Admin node Replication error

nspasov — Wed, 20 Mar 2013 17:42:03 GMT

Yes, something prevented your nodes from staying in sync and as a result, the nodes stopped trying to syncup. You will need to manually sync the nodes. Go to Administration > Deployment. Then select/check all of the nodes and click on the "Syncup" button above the personas.

Thank you for rating!

ISE Admin node Replication error

Rafael Mendes — Wed, 20 Mar 2013 19:13:04 GMT

Hi Neno,

Ok, now its working fine!

Thank you!

ISE Admin node Replication error

nspasov — Wed, 20 Mar 2013 19:47:31 GMT

Good to hear!

ISE Admin node Replication error

Ravi Singh — Thu, 04 Apr 2013 22:32:44 GMT

Go to Administration > Deployment. Then select/check all of the nodes and click on the "Syncup" button above the personas.

Re: ISE Admin node Replication error

said.sayah — Wed, 27 Jun 2018 09:19:03 GMT

Hi,

I have two nodes,

the 1 st one is OK ==> Pri (A) and Sec (M),

the Second is not sync ==> Sec (A) and Pri (M).

when I want to sync it i have this message :

Error : unable to load/admin/syncup Action.do?command=syncup DB status:12002

my problem happend after an uprgre from ver 2.0.3 to 2.3

Can you help me,

Re: ISE Admin node Replication error

said.sayah — Wed, 27 Jun 2018 09:24:48 GMT

When i performe the sync I check only yhe ISE who had the warning and i click syncup.

In your prevous reply you ask to check all ISE (Then select/check all of the nodes and click on the "Syncup" button above the personas.)

Re: ISE Admin node Replication error

said.sayah — Wed, 27 Jun 2018 09:24:49 GMT

When i performe the sync I check only yhe ISE who had the warning and i click syncup.

In your prevous reply you ask to check all ISE (Then select/check all of the nodes and click on the "Syncup" button above the personas.)

Re: ISE Admin node Replication error

fsarisac — Thu, 06 Feb 2020 07:22:14 GMT

So, What is the solution ?

You advice manuel syncronize but as you know this is not the solution for root cause...

What is reason for tis case and what is real solution ?

Thanks ..

Ugur DUMAN