topic Machine Authentication On One Vlan, User authentication on anoth in Network Access Control

Machine Authentication On One Vlan, User authentication on another

noc-cville — Mon, 11 Mar 2019 02:39:03 GMT

I am trying to have my wireless users authenticate the machines on one vlan and then based upon the user id from AD switch to another vlan if required. I have it working just fine except when the user logs on and ACS forces the new vlan, the IP stack goes to "Limited Access" because the ip address hasn't released and renewed. Because of this until they turn off and turn the wireless card back on they go no where and log on routines such as scripts and user group policies don't execute. Any help would be appreciated.

Machine Authentication On One Vlan, User authentication on anoth

Tarik Admani — Tue, 09 Oct 2012 02:30:12 GMT

Mark,

See if this article helps you resolve your issues, Cisco latest supplicant anyconnect NAM is the supplicant that replaced the CSSC.

http://social.technet.microsoft.com/Forums/en-US/winserverNAP/thread/f68dc3f0-744a-4d0f-b85a-87f8bc531fd0

Thanks,

Tarik Admani
*Please rate helpful posts*