topic ACS 5 Radius IP Assignment in Network Access Control

ACS 5 Radius IP Assignment

zhuzha1982 — Mon, 11 Mar 2019 02:09:56 GMT

We have number of GPRS terminals, they work in our private APN. Can we assign static or dynamic IPs to them?

Terminals work with IP, not with PPP. We have direct connect with ISP via serial interface. ISP forwards all Radius traffic to our ACS appliance.

ACS 5 Radius IP Assignment

Jatin Katyal — Wed, 06 Jun 2012 05:17:10 GMT

You may assign a static ip address. You may try this:

ACS 5 Radius IP Assignment

zhuzha1982 — Wed, 06 Jun 2012 07:16:38 GMT

Thanx for reply.

I've already tried it, but it does not work. I see in ACS RADIUS Authentication Detail than appliance sent this attribute but terminal don't get it. Strange, but with ACS 3 we didn't have problems assigning static or dynamic IPs to these terminals.

ACS 5 Radius IP Assignment

Jatin Katyal — Wed, 06 Jun 2012 13:32:43 GMT

What do you mean by terminals? Could you please elborate it?

Also, make sure you've radius accounting enabled on the network access device.

Regards,

Jatin

ACS 5 Radius IP Assignment

zhuzha1982 — Wed, 20 Jun 2012 08:12:17 GMT

Sorry for late response.

These are POS terminals, and nobody here knows how they work.

Your answer was almost right except name of attribute: giving a name Framed-IP-Address works fine.