topic CWA with WLC Firmware 7.0.228 and ISE 1.1.1 in Network Access Control

CWA with WLC Firmware 7.0.228 and ISE 1.1.1

Pongsatorn Maneesud — Mon, 11 Mar 2019 02:41:51 GMT

Hi,

Does Cisco ISE central web authentication supports on WLC version 7.0.228 ?

My customer has many access points which are support only for firmware code 7.0.228.

Cisco ISE version 1.1.1

WLC 5500 Series but the existing access point is cannot support to 7.3

Thanks,

Pongsatorn Maneesud

CWA with WLC Firmware 7.0.228 and ISE 1.1.1

martyn.rees — Sat, 20 Oct 2012 06:49:57 GMT

Which AP's do they have?

CWA with WLC Firmware 7.0.228 and ISE 1.1.1

Pongsatorn Maneesud — Wed, 24 Oct 2012 01:43:57 GMT

AP1230.

CWA with WLC Firmware 7.0.228 and ISE 1.1.1

Tarik Admani — Wed, 24 Oct 2012 04:49:32 GMT

AFter checking both the ISE and the WLC release notes it looks as if CWA with Radius NAC support was introduced in 7.2.110

WLC -

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2_110_0.html#wp784178

ISE -

http://www.cisco.com/en/US/docs/security/ise/1.1.1/compatibility/ise_sdt.html#wp55038

Hope that helps.

Tarik Admani
*Please rate helpful posts*

Re: CWA with WLC Firmware 7.0.228 and ISE 1.1.1

nspasov — Wed, 24 Oct 2012 21:51:57 GMT

Tarik is correct, you need 7.2.x and later to use CWA with ISE. Here is a general summary of features supported on ISE on 7.0 and 7.2 versions of code:

Scenarios WLC 7.0 7.2

802.1X Auth Yes Yes

802.1X + Posture Yes Yes

802.1X + Profiling Yes Yes

Web Auth + Posture No * Yes

Web Auth + Profiling Inventory only * Yes

Central Web Auth(CWA) No * Yes

Local Web Auth(LWA) Yes Yes

Re: CWA with WLC Firmware 7.0.228 and ISE 1.1.1

Pongsatorn Maneesud — Thu, 25 Oct 2012 02:32:55 GMT

Thank you so much.