ACS 5.0 hardware replacement

anva12345 — Mon, 11 Mar 2019 02:12:51 GMT

Dear All

For our client, we have two ACS 5.0 deployed in primary and secondary mode.Primary ACS is failed and we are going to replace the hardware.Problem is we dont have backup of primary ACS and have backup of only secondary ACS.Also there is certificate used for authentication of wireless users.In this case how we can proceed for for the restore.

If we promote secondary ACS to primary and join the New ACS as secondary,will the certificate also synchronised? or we need to create CSR and obtain the certificate for new ACS?

Thanks in advance

ACS 5.0 hardware replacement

Jatin Katyal — Wed, 20 Jun 2012 11:53:40 GMT

ACS doesn't replicate certificates. All you can do, export the certificates from the ACS.

That's why a small number of configuration changes can be performed on a secondary server while in distributed enviornment, including configuration of the server certificate, and these changes remain local to the server.

Regards,

Jatin

Do rate helpful posts-

topic ACS 5.0 hardware replacement in Network Access Control

ACS 5.0 hardware replacement

ACS 5.0 hardware replacement