topic Cisco ISE Active Endpoint Usage Reset in Network Access Control

Cisco ISE Active Endpoint Usage Reset

CSCO10675262_2 — Mon, 11 Mar 2019 02:23:14 GMT

Hi,

I have a Cisco ISE running version 1.1 and I was wondering if it may be possible to reset the license usage/active endpoint shown on the dashboard? This was noticed after a restore of ISE due to replacement of hardware and I noticed that the license usage count/active endpoints does not seems to go down.

The following methods have been tried however without any success:

1. Reboot ise server/service

2. Disable all network devices making use of ise such that there are no clients/devices accessing it; example switch/wlc/etc...

3. Deleted all endpoints usage in identies/identies group

4. Disable profiling on ise

As the ise has been installed with a base license; not too sure if it may be either a bad restore (all service/application are working though) / bad radius accounting which does not timed out on the ise / etc...

Any help is appreciated on how to reset the active endpoint/license usage.

Thanks.

Cisco ISE Active Endpoint Usage Reset

Tarik Admani — Sun, 05 Aug 2012 17:38:12 GMT

Here is a method for removing the stale records. Please give this a try:

http://www.cisco.com/en/US/docs/security/ise/1.1/api_ref_guide/ise_api_ref_ch2.html#wp1072950

Thanks,

Tarik Admani
*Please rate helpful posts*

Cisco ISE Active Endpoint Usage Reset

CSCO10675262_2 — Thu, 16 Aug 2012 12:04:33 GMT

Hi,

Thanks for the information. The active endpoint has been reset successfully.

Hi,how did you do that...?

Shaik Moinuddin — Mon, 14 Sep 2015 15:28:03 GMT

Hi,

how did you do that...?

regards,

curl -k -X DELETE https://

Karel Navratil — Tue, 29 Mar 2016 19:57:55 GMT

curl -k -X DELETE https://[user]:[pass]@[primary monitoring node]/ise/mnt/api/Session/Delete/All

Hi,

bsmagulov1 — Tue, 23 Aug 2016 09:56:08 GMT

Hi,

Could you send instruction how and where to enter this command? I `ve tried to do that several times...

I know that this command is for linux operating system. But I don`t know how to login into linux shell...

regards,