topic User Access - in Network Access Control

User Access -

kaoslife — Mon, 11 Mar 2019 02:27:59 GMT

We are in the process of connection our networks to an outside vendor. We are installing a 3925 ISR at their location and a matching 3925 ISR at ours and configiring a DMVPN connection between them. Other than putting ACL's on the router at the vendor location limiting IP's and Ports allowed, can we configure something that would force the user to Authenticate before they could access the network at our location?

User Access -

Tarik Admani — Mon, 27 Aug 2012 16:36:33 GMT

If you are configuring a site to site tunnel to allow the traffic to come across you can consider using auth-proxy and tie that in to a radius server if you want.

Here is some documentation that covers this:

http://www.cisco.com/en/US/products/sw/secursw/ps1018/prod_configuration_examples_list.html

Thanks,

Tarik Admani
*Please rate helpful posts*