topic ACS5.3 - VMWare installation -Store failure (acsserver, SystemSt in Network Access Control

ACS5.3 - VMWare installation -Store failure (acsserver, SystemStatus)

dpugalendi.d — Mon, 11 Mar 2019 02:32:49 GMT

I am gettin this error for every 1hr -- ACS5.3 - VMWare installation -Store failure ; pls help me to stop

Cisco Secure ACS - Alarm Notification
Severity: Critical

Alarm Name	System Alarm [Collector]
Cause/Trigger	Store failure (acsserver, SystemStatus)
Alarm Details	Please see Collector log for details
Generated On	Thu Sep 13 16:07:44 UTC 2012

ACS5.3 - VMWare installation -Store failure (acsserver, SystemSt

hkhrais — Sat, 15 Sep 2012 12:39:37 GMT

Hi ,

the details said see log collector , would u pls check it and post the error msg (if u found any)

ACS5.3 - VMWare installation -Store failure (acsserver, SystemSt

Tarik Admani — Mon, 17 Sep 2012 03:24:12 GMT

Hussam,

Can you please help by providing more information as to what the log collector is? From my experience there are few more steps in getting this information from the log collector, such as debugging the monitoring component, reproducing the issue, and then looking in the right log file after reproducing this issue. Do you have those steps handy?

Thanks,

Tarik Admani
*Please rate helpful posts*

ACS5.3 - VMWare installation -Store failure (acsserver, SystemSt

dpugalendi.d — Mon, 17 Sep 2012 06:03:01 GMT

pls update me the steps also

ACS5.3 - VMWare installation -Store failure (acsserver, SystemSt

Amjad Abdullah — Mon, 17 Sep 2012 06:18:56 GMT

Was ACS it working fine before?

If yes, was there anything done before the problem to appear?

Is the ACS working fine without a problem? or it is not working as supposed?

I usually receive such stupid notifications from ACS where I can find no issue with the ACS services.

I suggest that you restart the services and check.

what does this command on CLI show you:

show application status acs

Amjad

Rating useful replies is more useful than saying "Thank you"

ACS5.3 - VMWare installation -Store failure (acsserver, SystemSt

dpugalendi.d — Tue, 18 Sep 2012 04:44:05 GMT

yes , the application and features are working fine ; but after restart also i am getting this unknown erros ,

acsserver/admin# sh application status acs

ACS role: PRIMARY

Process 'database'                  running
Process 'management'                running
Process 'runtime'                   running
Process 'view-database'             running
Process 'view-jobmanager'           running
Process 'view-alertmanager'         running
Process 'view-collector'            running
Process 'view-logprocessor'         running

acsserver/admin#

ACS5.3 - VMWare installation -Store failure (acsserver, SystemSt

dpugalendi.d — Fri, 28 Sep 2012 04:38:09 GMT

Any other inputs needed , can any one help me to proceed !!!