topic Re: ACS 5.2 database failure RadiusAccounting in Network Access Control

ACS 5.2 database failure RadiusAccounting

rbortolet68 — Mon, 11 Mar 2019 02:22:19 GMT

Hello,

on the dashboard of the "Monitoring & Report Viewer" I see a lot of system alarms related to the database.

The explanation of the alarm says to look at the Collector logs for the details.

Anybody can help me to better understand where I have to look at ?

ACS 5.2 database failure RadiusAccounting

Tarik Admani — Wed, 01 Aug 2012 14:56:10 GMT

You will have to run debugs on the ACS server and then capture the events again. There is a similar bug that is opened for the tacacs accounting and hasnt been resolved as of ACS 5.3 patch 5. I would suggest opening a tac case to have them take a look.

Here is the bug that i am referrring - CSCts67174

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCts67174

Tarik Admani
*Please rate helpful posts*

ACS 5.2 database failure RadiusAccounting

ajay pandey — Sat, 23 Mar 2013 03:25:59 GMT

Hello Friends,

Any udpate on this,

Currently I am finding same alerts for below mentioned version.

Version : 5.3.0.40.3

I am getting database failiure messages for Radius authentication & radius accounting & those are prompted as critical messages.

Is this bug fixed in later version or ACS upgrades. Please let me know.

Thanks

Ajay

Re: ACS 5.2 database failure RadiusAccounting

Amjad Abdullah — Sat, 23 Mar 2013 17:59:40 GMT

Akay: you may update to latest patch and check.

Sent from Cisco Technical Support iPad App