aaa configured server from failed to active

gaurav bhardwaj — Mon, 11 Mar 2019 01:56:48 GMT

Does anyone know if there is a method to change an aaa configured server from failed to active?

For example I have two RSA servers configured as aaa servers on my ASA. I currently have a problem with the second one (sho aaa server shows it as failed) This isn't normally an issue expect when I reboot the main RSA server which results in the primary aaa server to go to 'failed'. I can't find any way of resetting this other than a reload.

reactivation-mode depletion deadtime 1

this command i enter it mean after one min the acs server will reactive.

aaa configured server from failed to active

Federico Ziliotto — Wed, 28 Mar 2012 16:09:15 GMT

Hi Gaurav,

Another option would be to delete and re-add the AAA server in the ASA.

Regards,

Fede

If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

topic aaa configured server from failed to active in Network Access Control

aaa configured server from failed to active

aaa configured server from failed to active