ACS 5.1 802.1x configuration guideance

c.walsh — Mon, 11 Mar 2019 01:56:32 GMT

I am looking for some guidance in configuring 802.1x authentication on ACS 5.1.0.44 & Catalyst 2960S switches.

All the documents i have found seem to have incorrect screen shots or missing steps.

I am new to ACS, so don't have much experience.

I have found a doc external to Cisco

however this just hangs when attempting to complete the task in figure G.

The other docs are for configuring IBNS & assume that 802.1x is already configured.

thanks in advance

Colin

Federico Ziliotto — Wed, 28 Mar 2012 16:21:38 GMT

Hi Colin,

I hope this could help you out:

This guide refers to Cisco ISE as the authentication server.

However, its configuration could be easily "translated" into ACS 5.

The switching part stays valid.

Regards,

Fede

If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

topic ACS 5.1 802.1x configuration guideance in Network Access Control