topic Radius Return Attribute to set Duplex settings? in Network Access Control https://community.cisco.com/t5/network-access-control/radius-return-attribute-to-set-duplex-settings/m-p/1931836#M209033 <HTML><HEAD></HEAD><BODY><P>Did you get a chance to try it out ?</P></BODY></HTML> Mon, 18 Feb 2013 23:34:03 GMT jan.nielsen 2013-02-18T23:34:03Z Radius Return Attribute to set Duplex settings? https://community.cisco.com/t5/network-access-control/radius-return-attribute-to-set-duplex-settings/m-p/1931832#M209005 <P>Hi All,</P><P></P><P>I am doing 802.1X for a user on Cisco 3650 and wanted the Radius Server to return an attribute to set the Duplex setting of the port. Is it possible? If it's possible then please help me with the correct Radius Return Attribute.</P><P></P><P>Thanks in Advance.</P><P></P><P>Regards,</P><P>Moochan</P> Mon, 11 Mar 2019 01:52:00 GMT https://community.cisco.com/t5/network-access-control/radius-return-attribute-to-set-duplex-settings/m-p/1931832#M209005 moorthychandran 2019-03-11T01:52:00Z Radius Return Attribute to set Duplex settings? https://community.cisco.com/t5/network-access-control/radius-return-attribute-to-set-duplex-settings/m-p/1931833#M209008 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I am also interessted by the configuration of Duplex and speed by profile on Radius server. Did you find a solution?</P><P></P><P>Thanks in advance</P><P></P><P>Regards,</P><P></P><P>Vincent</P></BODY></HTML> Tue, 05 Feb 2013 11:14:09 GMT https://community.cisco.com/t5/network-access-control/radius-return-attribute-to-set-duplex-settings/m-p/1931833#M209008 vincentbelliard 2013-02-05T11:14:09Z Radius Return Attribute to set Duplex settings? https://community.cisco.com/t5/network-access-control/radius-return-attribute-to-set-duplex-settings/m-p/1931834#M209012 <HTML><HEAD></HEAD><BODY><P>I don't think there is a common radius attribute to set duplex on an interface, you should look into the auto smart port feature, which allows you to create switchport configuration macro on the switch, where you can set duplex settings, and you can then tell the switch to run the name of that macro with a cisco radius attribute as a result of 802.1x authentication.</P></BODY></HTML> Wed, 06 Feb 2013 10:52:13 GMT https://community.cisco.com/t5/network-access-control/radius-return-attribute-to-set-duplex-settings/m-p/1931834#M209012 jan.nielsen 2013-02-06T10:52:13Z Radius Return Attribute to set Duplex settings? https://community.cisco.com/t5/network-access-control/radius-return-attribute-to-set-duplex-settings/m-p/1931835#M209024 <HTML><HEAD></HEAD><BODY><P>It looks like a good way of doing that.I will look into it now.</P><P></P><P>Thanks </P><P></P><P>Regards,</P><P></P><P>Vincent</P></BODY></HTML> Wed, 06 Feb 2013 13:34:25 GMT https://community.cisco.com/t5/network-access-control/radius-return-attribute-to-set-duplex-settings/m-p/1931835#M209024 vincentbelliard 2013-02-06T13:34:25Z Radius Return Attribute to set Duplex settings? https://community.cisco.com/t5/network-access-control/radius-return-attribute-to-set-duplex-settings/m-p/1931836#M209033 <HTML><HEAD></HEAD><BODY><P>Did you get a chance to try it out ?</P></BODY></HTML> Mon, 18 Feb 2013 23:34:03 GMT https://community.cisco.com/t5/network-access-control/radius-return-attribute-to-set-duplex-settings/m-p/1931836#M209033 jan.nielsen 2013-02-18T23:34:03Z