topic Secondary ACS accessibility in Network Access Control https://community.cisco.com/t5/network-access-control/secondary-acs-accessibility/m-p/1895198#M217160 <HTML><HEAD></HEAD><BODY><P>There's no additional config needed. Pings and all traffic are allowed into both primary and secondary ACS.</P></BODY></HTML> Thu, 05 Apr 2012 16:49:16 GMT Eduardo Aliaga 2012-04-05T16:49:16Z Secondary ACS accessibility https://community.cisco.com/t5/network-access-control/secondary-acs-accessibility/m-p/1895197#M217133 <P>Hi all,</P><P></P><P>I have an identical ACS 5.1 pair connected in active/backup mode. Is it by design that only the primary ACS IP address should be "pingable" from remote subnets but the secondary ACS only from the local subnet, or is there a configuration setting that I need to enable the secondary one as well?</P><P></P><P>Thanks in advance.</P><P></P><P>Roni.</P> Mon, 11 Mar 2019 01:54:23 GMT https://community.cisco.com/t5/network-access-control/secondary-acs-accessibility/m-p/1895197#M217133 dronsa 2019-03-11T01:54:23Z Secondary ACS accessibility https://community.cisco.com/t5/network-access-control/secondary-acs-accessibility/m-p/1895198#M217160 <HTML><HEAD></HEAD><BODY><P>There's no additional config needed. Pings and all traffic are allowed into both primary and secondary ACS.</P></BODY></HTML> Thu, 05 Apr 2012 16:49:16 GMT https://community.cisco.com/t5/network-access-control/secondary-acs-accessibility/m-p/1895198#M217160 Eduardo Aliaga 2012-04-05T16:49:16Z