topic Console - No login in Network Access Control

Console - No login

Muhammad Bagasra — Mon, 11 Mar 2019 01:32:44 GMT

Hi,

I am trying to configure no login authentication on console. Here are the configuration. But when I try to login thru console, it ask for password. I tried every password (secret & password) non is working. Please help.

aaa new-model

aaa authentication login CONSOLE none

aaa authentication enable default group tacacs+ enable line

aaa authorization exec default group tacacs+ local none

aaa session-id common

line con 0

exec-timeout 30 0

logging synchronous

Console - No login

smitesh kharecha — Thu, 10 Nov 2011 08:37:24 GMT

Hi,

Make one local username and password on the device.

Under line console 0, configure password which will be used to authenticate if you connect via console only.

Regards,

Smitesh

Console - No login

Richard Burts — Thu, 10 Nov 2011 17:47:58 GMT

If you do not want the console to prompt for a password then configure this

line con 0

no login

Give it a try and let us know how it works.

HTH

Rick

Console - No login

Javier Henderson — Mon, 14 Nov 2011 16:27:50 GMT

Muhammad,

Your configuration, as shown on your posting, should work as expected, ie no authentication should happen on the console. Can you post the output of "show run" (just the relevant lines, that is those starting with "aaa ... " and those following the console line.

Also, capture the debug of "debug aaa authen" and post the output.