topic [ACS 5.2.0.26] How to install cumulative update? in Network Access Control

[ACS 5.2.0.26] How to install cumulative update?

Patrick Tran — Mon, 11 Mar 2019 01:59:24 GMT

Hello,

I want to install cumulative patch 9 for Cisco ACS 5.2.0.26

I found installation guide:

Instructions on how to install the patch ========================================

1. open CLI console

2. define new repository in which the 5-2-0-26-9.tar.gpg resides

3. issue: 'acs patch install 5-2-0-26-9.tar.gpg repository YOUR_REPOSITORY'

We have configured 2 ACS appliances in "Split ACS Deployment"

How to install cumulative patch on 2 servers?

If I install on primary server, does the patch replicate on secondary?

Thanks for your help,

Patrick

Jagdeep Gambhir — Tue, 10 Apr 2012 13:12:54 GMT

Patrick,

Patch needs to be install on both ACS saprately via CLI. It will not replicate.

Regards,

~JG

Do rate helpful posts

Patrick Tran — Tue, 10 Apr 2012 13:41:12 GMT

Thanks for your answer

Best regards,

Patrick

Patrick Tran — Wed, 11 Apr 2012 07:17:55 GMT

Does secondary server need to be deregistered before patch installation ?

Regards,

Patrick

jrabinow — Wed, 11 Apr 2012 07:21:16 GMT

There is no need to deergister the secondary server. Can run with different patch versions for release

This would not work with running with two different releases (5.2 versus 5.3) in which case would need to be deregistered

Patrick Tran — Wed, 11 Apr 2012 07:24:47 GMT

Thanks a lot for your (very) quick answer

Best regards,

Patrick