ACS 5.8 Web interface will not load

Felipe A. Amaya — Mon, 11 Mar 2019 07:45:32 GMT

Yesterday while doing some changes to a policy in Cisco ACS the application services restarted. I tried to login while the services were restarting through the web gui but I was unable to. After all services stabilized and return to normal I am now unable to login through the Web interface. I have tried different browsers and devices.

Below is the acs web interface result of the command issue. Would it

acs2/admin# sho acs-config-web-interface
migration interface is disabled
ucp interface is disabled
view interface is disabled
rest interface is disabled

Would reloading the ACS be necessary or is there anything that I can perhaps do to remediate the issue.

Hi,

johnd2310 — Tue, 13 Jun 2017 18:30:54 GMT

Hi,

Are all the acs services started. Run the following command:

show application status acs

Thanks

John

topic ACS 5.8 Web interface will not load in Network Access Control

ACS 5.8 Web interface will not load

Hi,