topic So based on what you have in Network Access Control

SSID Authentication through ISE

rohitbhanu009 — Mon, 11 Mar 2019 07:43:23 GMT

Hi,

We are looking SSID authentication through ISE. Cussrently SSID authentication set in the WLC and looking for move it to ISE server.

SSID --> MAC filtering in WLC--> PSK------existing setup

SSID --> MAC registed under identity group--> PSK ---New setup

I have created the policy is ISE but not seen any hit on the ISE monitoring node.

Please find seeting in the attached file.

So based on what you have

Ambuj M — Wed, 17 May 2017 03:52:40 GMT

So based on what you have configured, I would check couple of more things here.

make sure the WLC is added on ISE as an authenticator and is a part of device type "wireless controller"

for authentication identity store, are you using internal endpoint or internal user ??

for authorization condition I would configure 3 things

if App_Net_device AND wireless MAB AND called station id ends with TApp_net

make sure shared secrets are correct on WLC and ISE and try again.

let us know if it works.

**rate useful posts**

Hi,

rohitbhanu009 — Fri, 26 May 2017 09:01:34 GMT

Hi,

Thanks for the reply,

Actually i faced new problem in the ISE servers. I can`t see live log in the Operation TAB. I checked the ISE applicatio status and looks good. Also checked the disk utilization and its also normal. If you can help me on this that would be much appriciated.OR shall i open new discussion. for this issue.