topic ACS 5.2 in Network Access Control https://community.cisco.com/t5/network-access-control/acs-5-2/m-p/1759152#M229119 <HTML><HEAD></HEAD><BODY><P> Aalvarado,</P><P></P><P>You have to enter them manually one at a time or import them from your old ACS system using the tools 5.2 provides. I did them manually anyway just to be sure everythign was entered properly.</P><P></P><P>Thanks,</P><P><BR />Randy</P></BODY></HTML> Wed, 17 Aug 2011 15:01:55 GMT randy.klassen 2011-08-17T15:01:55Z ACS 5.2 https://community.cisco.com/t5/network-access-control/acs-5-2/m-p/1759151#M229118 <P>Does anyone know if you can create range similiar to the old acs version such as this 10.1.1-15.1. On the new ACS This usually does the entire range for the old version. Or do you need to list them individually under the ip range tab. Any Ideas.</P> Mon, 11 Mar 2019 01:19:37 GMT https://community.cisco.com/t5/network-access-control/acs-5-2/m-p/1759151#M229118 ARMANDO ALVARADO 2019-03-11T01:19:37Z ACS 5.2 https://community.cisco.com/t5/network-access-control/acs-5-2/m-p/1759152#M229119 <HTML><HEAD></HEAD><BODY><P> Aalvarado,</P><P></P><P>You have to enter them manually one at a time or import them from your old ACS system using the tools 5.2 provides. I did them manually anyway just to be sure everythign was entered properly.</P><P></P><P>Thanks,</P><P><BR />Randy</P></BODY></HTML> Wed, 17 Aug 2011 15:01:55 GMT https://community.cisco.com/t5/network-access-control/acs-5-2/m-p/1759152#M229119 randy.klassen 2011-08-17T15:01:55Z