https://community.cisco.com/t5/network-access-control/how-to-check-plus-license-endpoint-list/m-p/3076224#M24222 <P>License usage is usually based on currently active sessions - based on the receipt of a Radius Accounting Start message. For example, with plus, a client that matches an Authz policy that has a profiling condition will consume 1 license.</P> <P>You can usually click on the license usage bar and it should open up a new window with the current active sessions report for that license. You can also export this report if you want to.</P> <P>Sessions are removed when the Radius Accounting Stop is received. I know that there is a session removal period after which all the old inactive sessions are removed from ISE, which then clears up the license usage. I believe it is 5 days but I am not sure on that.</P> <P></P> Mon, 30 Jan 2017 21:24:52 GMT Rahul Govindan 2017-01-30T21:24:52Z https://community.cisco.com/t5/network-access-control/how-to-check-plus-license-endpoint-list/m-p/3076223#M24220 <P>Hello,<BR /><BR />We run ISE 1.4.0.253<BR /><BR />Our "License Usage" panel indicates that we've 320 "Plus" licenses consumed.<BR /><BR />How can we identify all endpoints which use these "Plus" licenses?<BR />Could we generate a list of theses endpoints?<BR />Do they have a specific field/value inside logs?<BR /><BR />"License Usage" panel speaks about "current usage".<BR />Does this license usage amount is all endpoints currently connected?<BR />Or is it the cumulative of all endpoints on which a Plus license was applied?<BR />Does "Plus" licenses have expiration or cleanup delay?<BR /><BR />Regards,<BR />Chris</P> <P></P> Mon, 11 Mar 2019 07:24:49 GMT https://community.cisco.com/t5/network-access-control/how-to-check-plus-license-endpoint-list/m-p/3076223#M24220 chrbar.net 2019-03-11T07:24:49Z https://community.cisco.com/t5/network-access-control/how-to-check-plus-license-endpoint-list/m-p/3076224#M24222 <P>License usage is usually based on currently active sessions - based on the receipt of a Radius Accounting Start message. For example, with plus, a client that matches an Authz policy that has a profiling condition will consume 1 license.</P> <P>You can usually click on the license usage bar and it should open up a new window with the current active sessions report for that license. You can also export this report if you want to.</P> <P>Sessions are removed when the Radius Accounting Stop is received. I know that there is a session removal period after which all the old inactive sessions are removed from ISE, which then clears up the license usage. I believe it is 5 days but I am not sure on that.</P> <P></P> Mon, 30 Jan 2017 21:24:52 GMT https://community.cisco.com/t5/network-access-control/how-to-check-plus-license-endpoint-list/m-p/3076224#M24222 Rahul Govindan 2017-01-30T21:24:52Z