Cisco ISE Endpoints database

JAMES WEST — Mon, 11 Mar 2019 07:24:31 GMT

Good morning all,

We have a Distributed ISE 2.1.0.474 deployment of 2 PAN/Mgnt Nodes, and 3 PSN Nodes. During our initial deployment of ISE we failed the Primary PAN node to test failover etc..., during this test we noticed that the Total Endpoints (normally 600+, and Active Endpoints 200+), was showing on the Secondary PAN node as Total Endpoints 19, Active Endpoints as 8.

All of the endpoints are showing on the Secondary PAN Node under > Administration > Groups > Endpoint Identity Groups > NewGroupCreated, so the Database has been copied between the Primary and Secondary PAN Node, but the Context Visibility does not show the same information.

Is this down to the Endpoints were originally imported via a CSV import, or some kind of license feature that does not show the Endpoints in the Context Visibility field when a failover has occured?

Thanks,

James

topic Cisco ISE Endpoints database in Network Access Control

Cisco ISE Endpoints database