topic Anyconnect 4.3 NAM installation with Junos pulse in Network Access Control

Anyconnect 4.3 NAM installation with Junos pulse

Pranav Gade — Mon, 11 Mar 2019 07:22:14 GMT

Hi All,

Currently we have deployed ISE 2.1 with Anyconnect 4.3 installation( Authentication + Posture).

We are not able to installed anyconnect 4.3 NAM module on Junos Pluse installed machine. Can anyone tell me the procedure for installing Anyconnect 4.3 ( NAM module ) and Junos Pluse on same machine.

Thanks in Advance.

Since NAM has control of

Rahul Govindan — Wed, 18 Jan 2017 00:53:21 GMT

Since NAM has control of network adapters, there may be some conflict with certain software that hold the same control over the machine. Can you try installing the Junos Pulse after the Anyconnect NAM client and see if that works?

Hi Rahul ,

Pranav Gade — Thu, 19 Jan 2017 06:38:20 GMT

Hi Rahul ,

Yes we have tried this bit it didn't work. I have found the solution we have to changes registry value in windows to fixed this, below are the details.

To resolve the issue, you need to edit the Windows Registry key:

HKLM/SYSTEM/CurrentControlSet/Control/Network/MaxNumFilters

This value defines the maximum number of network filter drivers allowed on the computer.

Try to change this value to 14 (maximum value), and the Junos Pulse install should finish successfully.

Source: http://forums.juniper.net/t5/SSL-VPN/Junos-Pulse-empty-window-Win-7-64-bit/td-p/96592/page/3

Thanks for all support

Thanks for reverting back

Rahul Govindan — Thu, 19 Jan 2017 06:54:57 GMT

Thanks for reverting back with the solution !!