topic VVID in Network Access Control

VVID

ssfreques — Mon, 11 Mar 2019 02:15:46 GMT

Is there a way to assign a voice vlan dynamically in an interface via a radius server?

best regards

Sergio

Re: VVID

Amjad Abdullah — Tue, 03 Jul 2012 16:44:02 GMT

Yes. But it depends also on your IOS version.

Check this for more details:

https://supportforums.cisco.com/docs/DOC-22478

Regards,

Amjad

Sent from Cisco Technical Support iPad App

Re: VVID

ssfreques — Tue, 03 Jul 2012 21:59:20 GMT

Could you please repost the link?

thanks

Re: VVID

Amjad Abdullah — Wed, 04 Jul 2012 05:20:31 GMT

Sorry. I corrected the link above.

Here is another doc that I hope you'll find useful:

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6638/config_guide_c17-605524.html#wp9000514

VVID

Tarik Admani — Wed, 04 Jul 2012 06:01:59 GMT

Sergio,

In addition to what Amjad posted here is a snip from the 3750 configuration guide for 802.1x authentication for the 3750s.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/15.0_1_se/configuration/guide/sw8021x.html#wp1289244

I would start off by trying to send the device-traffic-class=voice along with the vlan attributes.

thanks

Tarik Admani

Re: VVID

ssfreques — Wed, 04 Jul 2012 12:54:46 GMT

there was point that i was missing

In the current release of code, a static voice VLAN must be configured on the port (via the switchport access voice vlan ) command before a new VLAN can be assigned via RADIUS.

it solved my problem thanks.

for future reference my working configuration ...

interface GigabitEthernet0/1

switchport mode access

switchport voice vlan 2

authentication host-mode multi-domain

authentication port-control auto

mab

dot1x pae authenticator

spanning-tree portfast

end