topic Motorola RF Controller access via Cisco ACS in Network Access Control

Motorola RF Controller access via Cisco ACS

John Quick — Mon, 11 Mar 2019 02:05:38 GMT

Hi all,

I want to be able to use remote authentication on our Motorola RF controllers using Cisco ACS 5.2. We have the VSA loaded and we can choose the different user roles apart from 'Superuser'.

The reason for this is that the attribute ID for the 'SuperUser' role is 32768 and but Attribute ID within ACS can only take 3 digits (see fig.1 attached)

Has anyone had any experience of this and/or knows how to change this field to all for more than 3 digits?

Any help will be much appreciated.

Thanks

John

Motorola RF Controller access via Cisco ACS

jrabinow — Wed, 16 May 2012 13:06:30 GMT

I can see the issue you are refering to and does appear to be a bug - will dig out if there is one and if not open

A work around would be to not use an Attribute Type of enumeration but rather an Unsigned integer

Would then need to enter the value directly in the authorization profile rather than selecting from an enumeration

Motorola RF Controller access via Cisco ACS

John Quick — Thu, 17 May 2012 08:27:23 GMT

Thank you very much. Worked a treat!

If could find any info for this bug could you keep me updated?

Thanks

John

Motorola RF Controller access via Cisco ACS

jrabinow — Thu, 17 May 2012 09:06:36 GMT

Glad this helped. I opened a CDETS to document this issue. It should be resolved in ACS 5.4 which is currently planned to be available in the September timeframe

CSCtz93947: Can't create enumerated RADIUS attribute with ID of more than 3 digits