topic ACS 4.2, Alteon authentication failure by RADIUS protocol in Network Access Control

ACS 4.2, Alteon authentication failure by RADIUS protocol

yunchouljung — Mon, 11 Mar 2019 01:20:59 GMT

Hello

I have a question about ACS RADIUS authentication with Alteon 3408 L4 Switch.

I configured a ACS 4.2.1(build 15 patch 4) software for windows on Windows Server 2008 Server STD.

TACACS authentication with CISCO product was successfully passed.

but RADIUS (IETF) authentication with NORTEL 3408 Switch was failed.

ACS Authentication Failure Code was a " ACS password invalid "

I read the post that RADIUS VSA is needed in my environment.

but i can not search any sample Nortel VSA dictionary configuration.

somebody can give me a Notel specific VSA configuration.

thanks in advance.

yun choul in Korea.

yunchouljung — Sun, 28 Aug 2011 07:45:22 GMT

I already configured Service-Type "Administrative" on IETF RADIUS Attributes.

yunchouljung — Sun, 28 Aug 2011 08:01:27 GMT

I have completed successfully.

yes, the DEFECT POINT IS a """"""""""""" Administrative """""""""""""" on IETF RADIUS Attributes.

Thanks for all same problem posted.