topic ACS 5.1 SNMP Question in Network Access Control

ACS 5.1 SNMP Question

chris parkinson — Mon, 11 Mar 2019 01:14:31 GMT

We have ACS 5.1, and configured an SNMP string.

When we try to poll it via SNMP it doesn't respond. Polling PC is on the same subnet, pulled a wireshark trace and we see the SNMP request hit the ACS, but it never responds.

I'm thinking we missed somehtin obvious, I'd appreciate any pointers.

Thanks

Chris

ACS 5.1 SNMP Question

Tarik Admani — Thu, 21 Jul 2011 18:37:59 GMT

Chris,

Looks like you are hitting

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCte39351

Let me know what version you are on (patch level).

Thanks,

Tarik

ACS 5.1 SNMP Question

chris parkinson — Thu, 21 Jul 2011 19:14:54 GMT

Interesting, the ACS is in production at a remote site.

What's the easiest way for my tech to determine the current rev/patch level?

Also, where would we find instructions on re-starting the SNMP service?

Thanks

Chris

ACS 5.1 SNMP Question

Tarik Admani — Thu, 21 Jul 2011 22:30:07 GMT

To find the version just click on the about link in the top right at the acs homepage.

as far as restarting the acs snmp service you will not be able to do that, you will have to restart the acs services. (acs stop and acs start).

Thanks,

Tarik