topic ACS 5.0 with windows AD in Network Access Control

ACS 5.0 with windows AD

vinodjad1234 — Mon, 11 Mar 2019 01:09:02 GMT

Hi,

I searched cisco documents where as all the documents are having example of ACS 4.0 but i am very keen to know with ACS 5.0 integrated with AD.

If anyone could give me document especially with ACS 5.0 , it would be great for me to understand the ACS 5.0 set-up.

Matt Ankney — Sun, 12 Jun 2011 03:40:09 GMT

This document is more about setting up CA, but has a little about AD.

Hope it helps some.

ivan.martin — Sun, 12 Jun 2011 16:09:32 GMT

HI Matt

What things is necessary to configure 802.1X EAP PEAP with cisco acs 5.2 + active directory, in the active directory and the cisco acs?

cisco acs 5.2 working very well with active directory 2008 r2?? or is not possible work with it.

Thanks

Regards

IVAN

Vinay Sharma — Mon, 13 Jun 2011 03:48:42 GMT

Hi Ivan,

This is a AAA issue, so moving to AAA forum for faster response.

thanks,

Vinay

Jatin Katyal — Mon, 13 Jun 2011 10:51:07 GMT

Hi Ivan,

Configuring PEAP with ACS 5.1

ACS 5.2 does support windows AD running OS 2008 R2

You may check the release notes for ACS 5.2 under ACS resolved issue.

CSCtg12399

ACS 5.1 did not support 2008 R2 Server for AD.

In order to integrate ACS with AD, all you need a service account from the AD to have privileges to add computer object.

Regards,

Jatin

Do rate helpful posts-