topic Plse...help me on the communicating between CLEAN ACCESS MANAGER in Network Access Control

Plse...help me on the communicating between CLEAN ACCESS MANAGER and Switch 3560E-24Ps by snmp

huyen01thpm — Mon, 11 Mar 2019 01:09:40 GMT

Dear All,

I try to configure in both Clean Access Manager and Switch 3560E-24Ps on SNMP Version 2 protocol but I can't make it working together (For CAM and Switch 3560G-48Ps I can do that). Plse give me any suggestion to solve that problem. All configuration is as below:

AND in Switch 3560E (IOS: c3560e-ipbasek9-mz.122-50.SE2.bin) is configured as follow:

ip default-gateway 10.0.0.1

snmp-server community scb!@#$%^&*() RW

snmp-server enable traps snmp linkdown linkup

snmp-server enable traps mac-notification change move threshold

snmp-server host 10.0.159.100 scb!@#$%^&*()

Plse...help me on the communicating between CLEAN ACCESS MANAGER

Surendra BG — Mon, 13 Jun 2011 01:57:49 GMT

AM still not able to find what Wireless assistance you need?? Coz this is a Wireless Forum.. please post the same in switching Forum and you can expect the follow up right away!!

Regards

Surendra

Plse...help me on the communicating between CLEAN ACCESS MANAGER

Leo Laohoo — Mon, 13 Jun 2011 02:13:29 GMT

http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/412/cam/412_cam_book.html

Plse...help me on the communicating between CLEAN ACCESS MANAGER

Vinay Sharma — Mon, 13 Jun 2011 03:43:38 GMT

Hi Huyen,

this is a wireless Forum and your issue is related to NAC. So moving this to AAA forum for faster response.

thanks,

Vinay