topic ISE Device Authentication Identity Source Sequence in Network Access Control

ISE Device Authentication Identity Source Sequence

kevink707 — Tue, 23 Oct 2018 21:14:38 GMT

When using ISE as a TACACS server.

I know it is possible to specify multiple identity sources, (for example use internal first, then LDAP second, etc.). However, I can't seem to find where in the ISE GUI this is configured -- can someone help me find it?

Re: ISE Device Authentication Identity Source Sequence

balaji.bandi — Tue, 23 Oct 2018 21:43:57 GMT

below example guide should help you.

https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200208-Configure-ISE-2-0-IOS-TACACS-Authentic.html

Re: ISE Device Authentication Identity Source Sequence

Arne Bier — Tue, 23 Oct 2018 22:46:26 GMT

Yes - this is called Identity Source Sequences. You create them under the Administration > Identity Management > Identity Source Sequences.