topic ACS SE with multiple windows database in Network Access Control

ACS SE with multiple windows database

jain.nitin — Mon, 11 Mar 2019 00:33:20 GMT

Hi, is there any possiblity to integrate ACS SE appliance to integrate with two different active directory forests. There is no truns between both the forests.

if yes then what are the requirements and what r the steps involved in it.

Thanks

Re: ACS SE with multiple windows database

aneelaka — Sun, 07 Nov 2010 20:17:29 GMT

Yes, multiple windows Databse can be configured on ACS SE,

The Remote agent needs to installed on the DC in the forest and select the different DC under the unknown user policy

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.0/user/guide/qu.html#wp277275

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rasi.html

Re: ACS SE with multiple windows database

jedubois — Mon, 08 Nov 2010 21:16:00 GMT

Jatin,

In order for ACS to authenticate two different forests you would need to have a Forest Trust between the two, you stated I believe that there is not forest trust so in your case you would not be able to authenticated to two as you can only have 1 external windows domain defined.

--Jesse