topic Doubt adding NAC Server to Manager in Network Access Control https://community.cisco.com/t5/network-access-control/doubt-adding-nac-server-to-manager/m-p/1707776#M256403 <P>Hi all.</P><P></P><P>I have a pair of managers in HA mode and a pair of servers in HA mode. The solution is working in OOB Virtual Gateway.</P><P>When i add the server in the manager, which IP address must i use, the service IP address or the physical Ip address.</P><P>I'm running 4.8.2</P><P></P><P>Thank you!!</P><P></P><P>David</P> Mon, 11 Mar 2019 01:12:44 GMT David Martinez Garcia 2019-03-11T01:12:44Z Doubt adding NAC Server to Manager https://community.cisco.com/t5/network-access-control/doubt-adding-nac-server-to-manager/m-p/1707776#M256403 <P>Hi all.</P><P></P><P>I have a pair of managers in HA mode and a pair of servers in HA mode. The solution is working in OOB Virtual Gateway.</P><P>When i add the server in the manager, which IP address must i use, the service IP address or the physical Ip address.</P><P>I'm running 4.8.2</P><P></P><P>Thank you!!</P><P></P><P>David</P> Mon, 11 Mar 2019 01:12:44 GMT https://community.cisco.com/t5/network-access-control/doubt-adding-nac-server-to-manager/m-p/1707776#M256403 David Martinez Garcia 2019-03-11T01:12:44Z Doubt adding NAC Server to Manager https://community.cisco.com/t5/network-access-control/doubt-adding-nac-server-to-manager/m-p/1707777#M256460 <HTML><HEAD></HEAD><BODY><P>You will need to use the service ip address also check the certificates and make sure they are all correct and trusted accordingly.</P></BODY></HTML> Fri, 08 Jul 2011 05:06:38 GMT https://community.cisco.com/t5/network-access-control/doubt-adding-nac-server-to-manager/m-p/1707777#M256460 Tarik Admani 2011-07-08T05:06:38Z Doubt adding NAC Server to Manager https://community.cisco.com/t5/network-access-control/doubt-adding-nac-server-to-manager/m-p/1707778#M256475 <HTML><HEAD></HEAD><BODY><P>Beware when downloading the OOB Server Failover license to use the Primary MANAGER MAC address in the license generation. Otherwise it will not work.</P><P>Additionally make sure that time is synchronous between the CAM and CAS and that the CAM's certificate is trusted by the CAS and vice versa.</P></BODY></HTML> Fri, 08 Jul 2011 06:56:48 GMT https://community.cisco.com/t5/network-access-control/doubt-adding-nac-server-to-manager/m-p/1707778#M256475 jad.sadek 2011-07-08T06:56:48Z