topic Re: Cisco 5.0 ACS Solution engine in Network Access Control https://community.cisco.com/t5/network-access-control/cisco-5-0-acs-solution-engine/m-p/1615943#M257743 <HTML><HEAD></HEAD><BODY><P><SPAN style="color: #800000;">ACS 5.x doesn't work on PORT 2002 like ACS 4.2, it works on https-443 so in order to use ACS 5.x, you should URL</SPAN></P><P><SPAN style="color: #800000;"><BR /></SPAN></P><P><SPAN style="color: #800000;"><A class="jive-link-external-small" href="https://">https://</A><SPAN><IP-ADDRESS-OF-ACS></IP-ADDRESS-OF-ACS></SPAN></SPAN></P><P><SPAN style="color: #800000;"><BR /></SPAN></P><P><SPAN style="color: #800000;">To log in to the GUI, you must use the predefined username ACSAdmin and password default. When you access the GUI for the first time, you will be prompted to change the predefined password for the administrator. You can also define access privileges for other administrators who will access the GUI application.</SPAN></P><P></P><P></P><P><SPAN style="color: #800000;">Rgds, Jatin</SPAN></P><P><SPAN style="color: #800000;"><BR /></SPAN></P><P><SPAN style="color: #800000;"><BR /></SPAN></P><P><SPAN style="color: #800000;">Do rate helpful posts~</SPAN></P></BODY></HTML> Thu, 03 Feb 2011 13:36:44 GMT Jatin Katyal 2011-02-03T13:36:44Z Cisco 5.0 ACS Solution engine https://community.cisco.com/t5/network-access-control/cisco-5-0-acs-solution-engine/m-p/1615942#M257742 <P>Hi,</P><P></P><P>Just installed and finished intail setup of ACS version 5.0 Sol. engine. Next i'm not able to acces solution engine over internet explorer. Even not able to telnet port 2002.</P><P></P><P>Do i need to configure anything else for enabling gui in version 5.0?</P><P></P><P>Please assist.</P><P></P><P>Thanks!</P><P></P><P>Kamal</P><P><A href="mailto:kashyap_kamal@rediffmail.com" target="_blank">kashyap_kamal@rediffmail.com</A></P> Mon, 11 Mar 2019 00:47:34 GMT https://community.cisco.com/t5/network-access-control/cisco-5-0-acs-solution-engine/m-p/1615942#M257742 patnisez1 2019-03-11T00:47:34Z Re: Cisco 5.0 ACS Solution engine https://community.cisco.com/t5/network-access-control/cisco-5-0-acs-solution-engine/m-p/1615943#M257743 <HTML><HEAD></HEAD><BODY><P><SPAN style="color: #800000;">ACS 5.x doesn't work on PORT 2002 like ACS 4.2, it works on https-443 so in order to use ACS 5.x, you should URL</SPAN></P><P><SPAN style="color: #800000;"><BR /></SPAN></P><P><SPAN style="color: #800000;"><A class="jive-link-external-small" href="https://">https://</A><SPAN><IP-ADDRESS-OF-ACS></IP-ADDRESS-OF-ACS></SPAN></SPAN></P><P><SPAN style="color: #800000;"><BR /></SPAN></P><P><SPAN style="color: #800000;">To log in to the GUI, you must use the predefined username ACSAdmin and password default. When you access the GUI for the first time, you will be prompted to change the predefined password for the administrator. You can also define access privileges for other administrators who will access the GUI application.</SPAN></P><P></P><P></P><P><SPAN style="color: #800000;">Rgds, Jatin</SPAN></P><P><SPAN style="color: #800000;"><BR /></SPAN></P><P><SPAN style="color: #800000;"><BR /></SPAN></P><P><SPAN style="color: #800000;">Do rate helpful posts~</SPAN></P></BODY></HTML> Thu, 03 Feb 2011 13:36:44 GMT https://community.cisco.com/t5/network-access-control/cisco-5-0-acs-solution-engine/m-p/1615943#M257743 Jatin Katyal 2011-02-03T13:36:44Z