AnyConnect error messages

snir_orlanczyk — Mon, 11 Mar 2019 07:50:33 GMT

Hi,

i have deployed ISE 2.2 patch 1 with AnyConnect , the AnyConnect is installed with the VPN core model (i used the XML to disable the VPN functionality ) , NAM module - the endpoint are performing eap-fast with eap chaining so i need AnyConnect for it. and the ISE posture module (i currently have all posture rules disable because we are in early stages of deployment)

i have deployed the Anyconnect client and all of its modules using SCCM as followed , i used SCCM to install each MSI and then ran a script with "xcopy" to copy the XML file to the right place using an SCCM task.

the problem is that on some endpoints i get a message saying "failed to resolve the secure gateway's ip address, unable to establish VPN" and as i said i've disabled the VPN module using the XML.

did anyone ran into those error messages?

thanks for the help !

Snir

Re: AnyConnect error messages

marcell.varga94 — Wed, 28 Mar 2018 11:46:30 GMT

Dear snir_orlanczyk,

Did you manage to resolve this issue?

It seems we have the same problem and we would be glad to hear some insight regarding this matter.

Thank you in advance.

Best regards,

Marcell

topic Re: AnyConnect error messages in Network Access Control

AnyConnect error messages

Re: AnyConnect error messages