RADIUS Requests not Populating Attribute 4 (NAS-IP-Address)

Mike Hendriks — Mon, 11 Mar 2019 00:48:40 GMT

I'm trying to get a Cisco 3120G configured for RADIUS authentication. I have many other IOS devices with identical configuration lines working, however, this one is giving me a hard time. The RADIUS server policy is configured by NAS-IP-Address. The AAA and radius configuration is as follows:

aaa new-model
aaa authentication login default group radius local
aaa authorization exec default group radius local

radius-server host 10.x.x.x auth-port 1645 acct-port 1646
radius-server source-ports 1645-1646
radius-server key 7 XXXXXXXXXXXXXX

See the following Radius debug information:

indrc3120a#
000284: Feb 8 14:05:15.447 PST: RADIUS: Pick NAS IP for u=0x5992EF4 tableid=0 cfg_addr=0.0.0.0
000285: Feb 8 14:05:15.447 PST: RADIUS: ustruct sharecount=1
000286: Feb 8 14:05:15.447 PST: Radius: radius_port_info() success=1 radius_nas_port=1
000287: Feb 8 14:05:15.447 PST: RADIUS(00000000): Send Access-Request to 10.x.x.x:1645 id 1645/8, len 84
000288: Feb 8 14:05:15.447 PST: RADIUS: authenticator 12 5E 7E DF 01 B5 F1 D8 - 40 07 09 76 C5 88 C1 A4
000289: Feb 8 14:05:15.447 PST: RADIUS: NAS-IP-Address      [4]   6   0.0.0.0
000290: Feb 8 14:05:15.447 PST: RADIUS: NAS-Port            [5]   6   2
000291: Feb 8 14:05:15.447 PST: RADIUS: NAS-Port-Type       [61] 6   Virtual                   [5]
000292: Feb 8 14:05:15.447 PST: RADIUS: User-Name           [1]   13 "admin_user"
000293: Feb 8 14:05:15.447 PST: RADIUS: Calling-Station-Id [31] 15 "10.y.y.y"
000294: Feb 8 14:05:15.447 PST: RADIUS: User-Password       [2]   18 *
000295: Feb 8 14:05:15.505 PST: RADIUS: Received from id 1645/8 10.x.x.x:1645, Access-Reject, len 20
000296: Feb 8 14:05:15.505 PST: RADIUS: authenticator 4E EC 8F AB BB 8E F9 BB - 13 67 56 A3 5F F9 99 94
000297: Feb 8 14:05:15.505 PST: RADIUS: saved authorization data for user 5992EF4 at 0

Note the NAS-IP-Address attribute populated as 0.0.0.0

Another switch with an identical configuration returns the following:

tritc3120a#
350554: Feb 8 14:11:00.916 PST: RADIUS/ENCODE(000155BC): ask "Username: "
350555: Feb 8 14:11:10.605 PST: RADIUS/ENCODE(000155BC): ask "Password: "
350556: Feb 8 14:11:14.480 PST: RADIUS/ENCODE(000155BC):Orig. component type = EXEC
350557: Feb 8 14:11:14.480 PST: RADIUS: AAA Unsupported Attr: interface         [170] 4
350558: Feb 8 14:11:14.480 PST: RADIUS:   74 74                [ tt]
350559: Feb 8 14:11:14.480 PST: RADIUS/ENCODE(000155BC): dropping service type, "radius-server attribute 6 on-for-login-auth" is off
350560: Feb 8 14:11:14.480 PST: RADIUS(000155BC): Config NAS IP: 0.0.0.0
350561: Feb 8 14:11:14.480 PST: RADIUS/ENCODE(000155BC): acct_session_id: 87482
350562: Feb 8 14:11:14.480 PST: RADIUS(000155BC): sending
350563: Feb 8 14:11:14.480 PST: RADIUS/ENCODE: Best Local IP-Address 10.x.x.x for Radius-Server 10.y.y.y
350564: Feb 8 14:11:14.480 PST: RADIUS(000155BC): Send Access-Request to 10.y.y.y:1645 id 1645/222, len 90
350565: Feb 8 14:11:14.480 PST: RADIUS: authenticator 5F B1 17 DF 72 4B A6 3D - B6 7C D8 5C 85 66 B9 8D
350566: Feb 8 14:11:14.480 PST: RADIUS: User-Name           [1]   13 "admin_user"
350567: Feb 8 14:11:14.480 PST: RADIUS: User-Password       [2]   18 *
350568: Feb 8 14:11:14.480 PST: RADIUS: NAS-Port            [5]   6   2
350569: Feb 8 14:11:14.480 PST: RADIUS: NAS-Port-Id         [87] 6   "tty2"
350570: Feb 8 14:11:14.480 PST: RADIUS: NAS-Port-Type       [61] 6   Virtual                   [5]
350571: Feb 8 14:11:14.480 PST: RADIUS: Calling-Station-Id [31] 15 "10.z.z.z"
350572: Feb 8 14:11:14.480 PST: RADIUS: NAS-IP-Address      [4]   6   1.2.3.4
350573: Feb 8 14:11:14.556 PST: RADIUS: Received from id 1645/222 10.y.y.y:1645, Access-Accept, len 83
350574: Feb 8 14:11:14.556 PST: RADIUS: authenticator 24 D9 F9 E2 BB A3 66 F6 - 73 E8 5D 42 8C A5 17 DA
350575: Feb 8 14:11:14.556 PST: RADIUS: Service-Type        [6]   6   Administrative            [6]
350576: Feb 8 14:11:14.556 PST: RADIUS: Class               [25] 32
350577: Feb 8 14:11:14.556 PST: RADIUS:   59 6D 06 B1 00 00 01 37 00 01 0A DC 1E 18 01 CB C7 B8 82 D7 CA E2 00 00 00 00 00 00 00 0B               [ Ym7]
350578: Feb 8 14:11:14.556 PST: RADIUS: Vendor, Cisco       [26] 25
350579: Feb 8 14:11:14.556 PST: RADIUS:   Cisco AVpair       [1]   19 "shell:priv-lvl=15"
350580: Feb 8 14:11:14.556 PST: RADIUS(000155BC): Received from id 1645/222

Note that in the example above, the NAS-IP-Address is populating properly (I've just changed it for security reasons)

If anyone has any advice, it would be greatly appreciated. Does the switch need a restart? A RADIUS server process kick?

Thanks,

Re: RADIUS Requests not Populating Attribute 4 (NAS-IP-Address)

Jatin Katyal — Wed, 09 Feb 2011 00:24:14 GMT

Seems to be a bug,

CSCdx27019 Radius Access-request pkt sent by CSS doesnt contain NAS info

The Cisco ACS feature NAR (Network Access Restriction) with Radius does not work with the CSS. This is because radius attribute NAS-IP-Address is set to 0.0.0.0 in the Radius Authentication Request.

Rgds, Jatin

Do rate helpful posts

Re: RADIUS Requests not Populating Attribute 4 (NAS-IP-Address)

Mike Hendriks — Wed, 09 Feb 2011 16:51:48 GMT

Thanks Jatin, I believe you're correct.

I tried this command

radius-server attribute 4 10.2.1.1

As specified in this document:

http://www.cisco.com/en/US/docs/ios/12_3/12_3b/feature/guide/gt_siara.html

Unfortunately, it doesn't seem to be available. The only command I have is radius-server attribute 4 npr.

The release notes which describe the bug here:

http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11000series/v5.00.0.63/release/note/Reln5b63.html

Also describe a workaround with the radius-server source-interface command. This, too, is unavailable, unfortunately.

I've been able to create a workaround policy tied to the "RADIUS-Client-IP" attribute, and have the functionality I require for the time being.

Thanks again for your help.

topic Re: RADIUS Requests not Populating Attribute 4 (NAS-IP-Address) in Network Access Control

RADIUS Requests not Populating Attribute 4 (NAS-IP-Address)

Re: RADIUS Requests not Populating Attribute 4 (NAS-IP-Address)

Re: RADIUS Requests not Populating Attribute 4 (NAS-IP-Address)