topic vpn authentication in Network Access Control

vpn authentication

smailbouabdallah — Mon, 11 Mar 2019 01:02:19 GMT

Hi,

I am using ASA 5520 for VPN remote access. How I tell ASA to use TACACS first then LDAP when authenticating VPN users.

Is there a command for that or how to do it using ASDM.

Thanks,

Re: vpn authentication

Erick Delgado — Mon, 02 May 2011 12:47:56 GMT

Hello,

I guest that what you want to configure is double authentication.

If this is the case this can be only done using anyconnect and not IPSEC.

Please see link below that will help you with this matter.

If you have any question feel free to contact me.

Erick Delgado

Cisco CSE

Re: vpn authentication

andamani — Mon, 02 May 2011 15:50:16 GMT

Hi,

The double authentication is not possible with the Ipsec RA VPN.

We can configure the authentication for the Anyconnect RA VPN.

you need to edit the connection Profile > Advanced on the ASDM. You will see a secondary authentication server configuration. You can configure the server here.

Hope this helps.

Regards,

Anisha

P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.