topic Re: WebVPN Authentication in Network Access Control

WebVPN Authentication

w_basheer — Fri, 21 Feb 2020 18:15:09 GMT

I successed to let remote access users to be authenticated using ACS

(which use windows database)\.

but this did not work with WebVPN

it's only successed with Internal database.

Re: WebVPN Authentication

morgsizun — Mon, 03 Apr 2006 11:14:48 GMT

I suppose you use a vpn3000.

I think you should add your server for the group using webvpn under:

configuration | user management | groups

select your group and add an authentication server.

regards.

Re: WebVPN Authentication

colomacrespi — Tue, 04 Apr 2006 10:21:33 GMT

You don´t need to add an authentication server to the WebVPN Group. As it is explained in the configuration guide, the webvpn feature uses the global authentication parameters.

Anyway... I´m looking for the same thing...Were you able to find sort of solution to this?

Re: WebVPN Authentication

morgsizun — Wed, 05 Apr 2006 11:46:41 GMT

I agree with you but in this guide , it's explained that the first active server, independent of type, is used for authentication and authorization of WebVPN sessions.

So i tink that if the internal database is in first position in your authentication server list , the request isn't forwarded to next servers.

Regards.

Re: WebVPN Authentication

p-weir — Thu, 06 Apr 2006 13:02:21 GMT

Check under Configuration>System>Servers>Authentication that your RADIUS server is defined and at the top of the server list. Using the TEST option is very useful also.

Cheers, pete

Re: WebVPN Authentication

w_basheer — Fri, 07 Apr 2006 05:27:51 GMT

I successed to do this :

Authentication using ACS (Active Director)

I added a link URL point to http server.

Citrix BUT when i tried to open any application it gives me error stating that protocol error

Re: WebVPN Authentication

w_basheer — Fri, 07 Apr 2006 05:28:22 GMT

I successed to do this :

Authentication using ACS (Active Director)

I added a link URL point to http server.

Citrix BUT when i tried to open any application it gives me error stating that protocol error