ACS 4.2 - is it possible to change replication port?

henning.johannessen — Mon, 11 Mar 2019 00:44:28 GMT

Hi,

trying to find out if it some tweek to change the ACS replication port TCP/2000 to something else.

I know it's possible to make a different policy-map or to not inspect the Skinny protocol to avoid conflict, but that not the solution I'm looking for. Wondering if anybody knows of a different way to change the replication port in ACS 4.2.

Re: ACS 4.2 - is it possible to change replication port?

andamani — Fri, 21 Jan 2011 07:20:07 GMT

Hi,

what is the version of ACS you are running?

If you are running ACS 4.2.1.15 then,

Problem :
=========
ACS replication port re-configuration.
 
Resolution :
============
Please follow the following steps:
1.       Interface configuration > Advanced Options > Check the checkbox ACS
Communication Port Configuration.
2.       System Configuration > service control > Configure the Port to be
used for the ACS Internal Communication (choose any port between 2010 to
2025)
 
Regards,
Anisha

 P.S.: please mark this thread as resolved if you think your query is answered.

topic Re: ACS 4.2 - is it possible to change replication port? in Network Access Control

ACS 4.2 - is it possible to change replication port?

Re: ACS 4.2 - is it possible to change replication port?