topic Re: Device accsss based upon NDG using ACS 5.2 in Network Access Control

Device accsss based upon NDG using ACS 5.2

acharyr123 — Mon, 11 Mar 2019 01:54:52 GMT

Hi,

I have 2 types of network, DC & Office. I have 3 types of users NOC, Office & DC. Office netowrk devices are in Office NDG, DC network devices are in DC NDG. Becasue of such config, Office network users can only access Office devices & DC network users can only access DC network devices....

Now i have NOC users, who wants access to both Office & DC network devices. How can i achieve this?

Device accsss based upon NDG using ACS 5.2

Tarik Admani — Sat, 17 Mar 2012 22:01:51 GMT

You can achieve this by creating by using compound conditions. In the authorization section hit the customize button at the bottom right and then bring the compound condition option over from the left to right if it isnt there already.

I created an example for you using Dallas and San Jose:

You can hit the preview button and it will layout the boolean variables.

thanks,

tarik Admani

Device accsss based upon NDG using ACS 5.2

acharyr123 — Sun, 18 Mar 2012 12:35:20 GMT

Hi Tarik,

Can you send the screen shot to my personal id: acharyr@gmail.com? I am unable to view this in preview..

Device accsss based upon NDG using ACS 5.2

Tarik Admani — Sun, 18 Mar 2012 20:25:31 GMT

I sent the screenshot to you in a private message.

Thanks,

Tarik Admani

Re: Device accsss based upon NDG using ACS 5.2

acharyr123 — Sun, 18 Mar 2012 20:29:05 GMT

Thanks Tarik.

Rgds

Re: Device accsss based upon NDG using ACS 5.2

Tarik Admani — Sun, 18 Mar 2012 20:32:37 GMT

I also attached it to this thread for any other users.

thanks

Tarik Admani

Device accsss based upon NDG using ACS 5.2

acharyr123 — Thu, 12 Apr 2012 11:04:19 GMT

Hi Tarik,

Thanks for your suggestion....Appreciate your efforts..