topic ACS 5.2 install on Vmware - no managment over https in Network Access Control

ACS 5.2 install on Vmware - no managment over https

kristjan.edvardsson — Mon, 11 Mar 2019 01:47:57 GMT

I installed ACS 5.2 on Wmware. Everything seemed to install correctly.

I can access the server with SSH over the network. The server however

doesn´t seem to have https mangagment open.

For example show ports gives only port 22 (ssh)

and 111 for udp and tcp.

I have restarted everything. But reload on the CLI and

power on/off the VMware host but no luck.

I see people have this problem but I haven´t seen any answers yet.

ACS 5.2 install on Vmware - no managment over https

camejia — Wed, 08 Feb 2012 23:53:42 GMT

Hello,

Can you access the ACS CLI and execute "show application status acs"? Is the process "management" on "running" state or is it on "not monitored"?

Also, have you complied with the minimun requirements for ACS 5.2 installation on a VMWare?

Table 6-1 Minimum System Requirements
Requirement Type	Minimum Requirements
CPU	Intel Core2; 2.13 GHz
Memory	4 GB RAM
Hard Disks	500 GB of disk storage
NIC	1 GB NIC interface
Hypervisor	VMware ESX 3.5 or 4.0

If this was helpful please rate.

Regards.

ACS 5.2 install on Vmware - no managment over https

camejia — Wed, 08 Feb 2012 23:56:18 GMT

Hello,

Also, the "show ports" output should display the following on the first process:

ACS3/acsadmin# sh ports

Process : java (13769)

tcp: 0.0.0.0:2030, 0.0.0.0:61616, 0.0.0.0:443, :::43426, :::2020, ::ffff:12

7.0.0.1:8005, :::8999, :::6666, :::80, :::51515, :::45564

You can see the entry "0.0.0.0:443" referring to the open port for HTTPS.

Regards.

ACS 5.2 install on Vmware - no managment over https

david.tran — Thu, 09 Feb 2012 02:53:34 GMT

Carlos,

The information you provided is NOT correct. You do not need 500GB of diskspace. it will work with as little as 60GB in vmware ESXi. 4GB of RAM is also not correct. It will work with as little as 2GB RAM in vmware ESXi 4.1

I know because I have three different instances of ACS (5.1, 5.2 and 5.3) running on the same ESXi 4.1 with 120GB of diskspace and 4GB RAM. I provisioned each ACS with 60GB thin provision and 2GB with 4 cores each. It is a little slow but it works. Not recommendation for production but for lab purposes, it works quite well.

ACS 5.2 install on Vmware - no managment over https

camejia — Thu, 09 Feb 2012 05:03:04 GMT

David,

If you have an ACS 5.x installed with 60GB HDD then you should be using it with an Evaluation license and on a lab environment. That is correct. The requirements I included are meant for a Production ACS 5.x server.

Also, ACS 5.1 and 5.2 do not include support on ESXi 4.1. ACS 5.3 includes support on ESXi 4.1 but ACS 5.1 and 5.2 support up to ESX 4.0.

Regards.

ACS 5.2 install on Vmware - no managment over https

kristjan.edvardsson — Thu, 09 Feb 2012 10:49:23 GMT

Thanks guys.

I managmed to find out that my VMware image was not prepared correctly. What

I missed was the 2 virtual CPU´s instead of 1 I had set initially.

I have 60GB allocated disk space and 4Gig RAM. And after installing again

I can see all the ports (show ports) open líke 443 e.t.c.

So this CPU missing caused the install to behave like this. No https ports open no ACS service acticated

or existing. So how it is up. Still have have issues with some of the services are stuck in initializing.

Like managment and runtime. All others are up. But the machine is rather slow. I try to free up some

resources and see if this is a performance problem.

My setup is intended for LAB training so I don´t have high requirements.