topic Re: How to configure two radius servers on my Pix in Network Access Control

How to configure two radius servers on my Pix

Thomas Reiling — Mon, 11 Mar 2019 01:07:44 GMT

I want to add another AAA Radius server to my config just in case one goes down. Can someone let me know the command to add one more?

Thank you,

Thomas

andamani — Thu, 02 Jun 2011 01:37:23 GMT

Hi,

You can configure the following:

aaa-server protocol radius

aaa-server host

key < key1>

aaa-server host

key < key2>

Hope this helps.

Regards,

Anisha

P.S.: please mark this thread as answered if youfeel your query is resolved. Do rate helpful posts.

Thomas Reiling — Thu, 02 Jun 2011 11:07:53 GMT

Anisha,

I appreciate your response.

Please don't ask to have your responses marked as answered. It's distasteful.

Thanks again,

Thomas

andamani — Thu, 02 Jun 2011 16:22:17 GMT

Hi Thomas,

Thank you for the input.

We ask to mark the posts as answered so that these posts can be helpful to others if they face the same problem as you are facing now.

Rest is entirely your choice. 🙂

Regards,

Anisha