topic Re: Cisco ACS Replica Database Problems in Network Access Control

Cisco ACS Replica Database Problems

Andrew Hunter — Mon, 11 Mar 2019 00:58:06 GMT

Hi,

I'm running Cisco ACS version 4.2 (patch 4.2.1.15.2) in a primary replica environment. I have the primary replicating to 3 replicas. On the primary, the ACS.db file is around 80MB.

However, on my replicas, the db file increases in size incrementally at every replication, until all of the available disk space is taken up (12GB)

The only way I've found to resolve this is to periodically uninstall/reinstall the aplpication on the replicas.

Has anyone experienced this issue with the replica database size increasing exponentially until disk failure, and found a resolution?

Many thanks in advance.

Andy

Re: Cisco ACS Replica Database Problems

andamani — Mon, 04 Apr 2011 10:53:25 GMT

hi andrew,

does this happen on all three replication servers?

Regards,
Anisha

- do rate helpful posts.

Re: Cisco ACS Replica Database Problems

Andrew Hunter — Mon, 04 Apr 2011 11:00:13 GMT

Hi Anisha,

Yes this happens on all 3 replica servers, but the primary has no problems with db size

Re: Cisco ACS Replica Database Problems

andamani — Mon, 04 Apr 2011 11:42:28 GMT

Hi Andy,

Looks like there is some issue with your database and it is getting corrupt while replication.

Please open a TAC case and the engineer will look into it.

Regards,

Anisha