topic Re: enabling ICMP on cisco acs1120 in Network Access Control

enabling ICMP on cisco acs1120

sansarav720e — Mon, 11 Mar 2019 00:52:21 GMT

Hi All ,

We have downgraded cisco acs appliance 1120 from ACS 5.0 to ACS 4.2.1.15 , when we perform ICMP ping request to acs appliance its not responding , But i can do ping test from acs appliance on console mode not from GUI mode .

Is there any option to enable ICMP Ping response on cisco acs 1120 . else any patch to be upgraded to perform this action , my requirement is enable ICMP ping on acs appliance for troubleshooting . instead always check with telnet x.x.x.x 2002 for service responding

Re: enabling ICMP on cisco acs1120

andamani — Wed, 02 Mar 2011 05:02:51 GMT

Hi,

By default, ICMP ping is disabled on the Solution Engine

To enable ICMP ping, you must first install the applAcs_4.x-PingTurnOn_CSCsf15057_Patch.zip on the appliance. After this, you must copy the applAcs_4.x-PingTurnOn_CSCsf15057_Patch.zip file to the windows system from which you are running the .bat file.

The following link will give you details of the same:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/solution_engine/instalap.html#wp1132123

Regards,

Anisha

P.S.: please mark this thread as answered if you feel your query i resolved. Do rate helpful posts.

Re: enabling ICMP on cisco acs1120

sansarav720e — Thu, 03 Mar 2011 00:01:01 GMT

Hi Anisha ,

Is this patch applAcs_4.x-PingTurnOn_CSCsf15057_Patch.zip is not available on tools.cisco.com . From where i can download this patch , I have got valid partner cisco ID

Re: enabling ICMP on cisco acs1120

andamani — Thu, 03 Mar 2011 01:46:22 GMT

Hi Santosh,

The pathc available on cisco.com download page.

The path is as follows:

www.cisco.com > support > download software >Products > Security > Identity Management > Cisco Secure Access Control Server Solution Engine > Cisco Secure Access Control Server Solution Engine 4.2 > Secure Access Control Server (ACS) Solution Engine > 4.2.0.124.

the patches are as follows:

appl_Acs4.x_PingTurnOff_With_CSAgentUpdate_1_Patch.zip

appl_Acs4.x_PingTurnOn_With_CSAgentUpdate_1_Patch.zip

You will need a valid software download contract to download the patches.

Hope this helps.

Regards,

Anisha

P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.

Re: enabling ICMP on cisco acs1120

sansarav720e — Thu, 03 Mar 2011 03:47:34 GMT

Hi Anisha ,

Thanx a ton for your postings , I have downloaded the zip for ping turn on .I will upgrade this on to my device and let us know if have any difficulties . Thanx again

Re: enabling ICMP on cisco acs1120

sansarav720e — Fri, 04 Mar 2011 03:43:33 GMT

Hi Anisha ,

I have tried to upgrade patch on my acs 1120 appliance , I am getting error message stating that ""The requester head was not found "" , could you please help me over here .