topic Re: Command set permitting all show commands in Network Access Control https://community.cisco.com/t5/network-access-control/command-set-permitting-all-show-commands/m-p/1579578#M302049 <HTML><HEAD></HEAD><BODY><P>Hi Peter,</P><P></P><P>When you say that it doesn't work, do you mean that no "show" commands are allowed, or actually some of them work?</P><P>What commands did you test with? If any command works.. what are the working and non-working ones?</P><P>Did you configure authorization in orde to return a privilege level through the shell profile that is suitable for the show commands that you're testing?</P><P>What errors do you get on the ACS and/or on the switch?</P><P></P><P>I hope this helps!</P><P></P><P>Regards,</P><P>Federico</P></BODY></HTML> Thu, 07 Oct 2010 19:53:15 GMT Federico Lovison 2010-10-07T19:53:15Z Command set permitting all show commands https://community.cisco.com/t5/network-access-control/command-set-permitting-all-show-commands/m-p/1579577#M302048 <P>Hi guy,s</P><P></P><P>Having problem with permitting with command sets in ACS 5.2</P><P>i want to give a user access to all show command</P><P><IMG src="https://community.cisco.com/" /><IMG src="https://community.cisco.com/legacyfs/online/legacy/0/6/1/8160-4-10-2010%208-47-09.png" alt="4-10-2010 8-47-09.png" class="jive-image-thumbnail jive-image" width="450" /></P><P>this doesn't work</P><P>any idea's</P><P></P><P>greetings</P><P></P><P>Peter</P> Mon, 11 Mar 2019 00:27:36 GMT https://community.cisco.com/t5/network-access-control/command-set-permitting-all-show-commands/m-p/1579577#M302048 Peter Hagenaars 2019-03-11T00:27:36Z Re: Command set permitting all show commands https://community.cisco.com/t5/network-access-control/command-set-permitting-all-show-commands/m-p/1579578#M302049 <HTML><HEAD></HEAD><BODY><P>Hi Peter,</P><P></P><P>When you say that it doesn't work, do you mean that no "show" commands are allowed, or actually some of them work?</P><P>What commands did you test with? If any command works.. what are the working and non-working ones?</P><P>Did you configure authorization in orde to return a privilege level through the shell profile that is suitable for the show commands that you're testing?</P><P>What errors do you get on the ACS and/or on the switch?</P><P></P><P>I hope this helps!</P><P></P><P>Regards,</P><P>Federico</P></BODY></HTML> Thu, 07 Oct 2010 19:53:15 GMT https://community.cisco.com/t5/network-access-control/command-set-permitting-all-show-commands/m-p/1579578#M302049 Federico Lovison 2010-10-07T19:53:15Z