topic ACS 5.1 configure logging in Network Access Control

ACS 5.1 configure logging

iotoiotoioto — Mon, 11 Mar 2019 00:25:45 GMT

I'd like to configure logging "IP address".

Up to how many logging can I configure?

Cisco wab page say I can configure two logging on ACS two.

How about ACS 5.1?

ACS provides a system logging (syslog) feature. With the addition of this feature, all AAA reports and audit report messages can be sent to up to two syslog servers.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/configuration/guide/syslog.html

Re: ACS 5.1 configure logging

Tiago Antunes — Thu, 07 Oct 2010 15:58:56 GMT

Hi,

In ACS 5.x you can only define one syslog server on the CLI.

However, via the GUI I belive you can define as many you want (i never reached any limit...)

Please find complete info at:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/logging.html.

HTH,

Tiago

Re: ACS 5.1 configure logging

iotoiotoioto — Fri, 08 Oct 2010 02:54:37 GMT

Hi, Tiago.

> In ACS 5.x you can only define one syslog server on the CLI.

Wow, is it correct?

I think answer of CLI is everything.

So you tried to configuration "logging host x.x.x.x" ?

Re: ACS 5.1 configure logging

Tiago Antunes — Fri, 08 Oct 2010 08:24:22 GMT

Yes, via CLI it only allows to enter one ip address for the syslog with the command "logging host x.x.x.x" .

However, via GUI yuo can enter as many as you want.

HTH,
Tiago