topic Re: Active directory integration using Cisco2911 router in Network Access Control

Active directory integration using Cisco2911 router

parmar.pankaj — Mon, 11 Mar 2019 00:07:43 GMT

how to integrate active directory with Cisco 2911 router.

If any one knows please help

Thanks in advance!!!

Regards,

Pankaj Parmar

Re: Active directory integration using Cisco2911 router

spremkumar — Tue, 11 May 2010 09:46:34 GMT

Hi Pankaj

hope this helps

http://articles.techrepublic.com.com/5100-10878_11-6182945.html

regds

Re: Active directory integration using Cisco2911 router

Jatin Katyal — Tue, 11 May 2010 13:22:28 GMT

Hi Pankaj,

I think, you want that user should be authenticated by active directory database whenever they login to the router using telnet/ssh. Well, if that is the case then you have to integrate router with some external radius server, that could be Microsoft IAS. Now here we need to integrate AD with IAS or we can make our AD (domain controller) as a radius server.

On the router you only need to issue couple of commnads;

aaa authentication login default group radius local

radius-server host key

username privilege 15 password

For IAS side configuration, please check the below listed document;

http://articles.techrepublic.com.com/5100-10878_11-6180954.html?tag=leftCol;articleText

HTH

Plz rate helpful posts-