topic ACS user password expire in Network Access Control

ACS user password expire

arturo_triara — Sun, 10 Mar 2019 23:57:07 GMT

Hello all

We have Cisco ACS 4.1 and we need to know how to configure the user passwords to expire at determinate time and ask the user to change it.

its that possible?

thanks

regards...

Re: ACS user password expire

darpotter — Mon, 15 Feb 2010 19:16:38 GMT

Goto interface config and enable the password aging feature. You can make passwords age by use (ie set number of authentications) or by date - in your case you would want date. This is under system config as I recall, allthough it might be possible to set it up on a group by group basis.

Assuming your users are connecting to IOS devices by TACACS+ when the password is near to the expiry condition, ACS will start to send warnings that the password is about to expire. Once expired it will permit a specificied grace period after which the user is locked out.

The ACS online docs and user guide all document password aging.

Re: ACS user password expire

arturo_triara — Mon, 15 Feb 2010 22:58:58 GMT

Hello

i made the configuration on the interface config, and group Password Aging Rules

i configured Apply password change rule to Forces the user to change the password on the first log-in after an administrator has changed it.

when i try to loggin to the switch it shows this:

Chpass is currently disabled.

What could be missing?

thanks.

regards...