topic Cisco ACS v5.0 with PEAP-MSCHAPv2 in Network Access Control https://community.cisco.com/t5/network-access-control/cisco-acs-v5-0-with-peap-mschapv2/m-p/1290562#M318225 <P>I am have problems setting up the Cisco ACS server with PEAP-MACHAPv2. Does any one have a step by step guide to help with this issue..</P> Sun, 10 Mar 2019 23:47:27 GMT mbohler 2019-03-10T23:47:27Z Cisco ACS v5.0 with PEAP-MSCHAPv2 https://community.cisco.com/t5/network-access-control/cisco-acs-v5-0-with-peap-mschapv2/m-p/1290562#M318225 <P>I am have problems setting up the Cisco ACS server with PEAP-MACHAPv2. Does any one have a step by step guide to help with this issue..</P> Sun, 10 Mar 2019 23:47:27 GMT https://community.cisco.com/t5/network-access-control/cisco-acs-v5-0-with-peap-mschapv2/m-p/1290562#M318225 mbohler 2019-03-10T23:47:27Z Re: Cisco ACS v5.0 with PEAP-MSCHAPv2 https://community.cisco.com/t5/network-access-control/cisco-acs-v5-0-with-peap-mschapv2/m-p/1290563#M318226 <HTML><HEAD></HEAD><BODY><P>I do not have a step by step guide to hand. A few things that come to mind are</P><P>1) Define netwrok device</P><P>2) Set allowed protocols in service definition and select identity store</P><P>3) Install server certificate</P><P></P><P>One good way to trouble shoot such issues is to Monitoring &amp; Reports: &gt; Reports &gt; Catalog &gt; AAA Protocol </P><P>and then select "RADIUS_Authentication"</P><P></P><P>You will see pass/fail records. For each fail record see failure reason. Also select magnifying glass icon under "Details" and will get step-by-step details so that should see step where processing was stopped and failure returned. Will give input to see what configuration is missing</P><P></P></BODY></HTML> Tue, 10 Nov 2009 20:34:18 GMT https://community.cisco.com/t5/network-access-control/cisco-acs-v5-0-with-peap-mschapv2/m-p/1290563#M318226 jrabinow 2009-11-10T20:34:18Z