topic Re: isdn bri dialup in Network Access Control

isdn bri dialup

manivelindian — Sun, 10 Mar 2019 23:40:04 GMT

sir,

i configured isdn bri as a dialup in cisco router for remote side clients.

how do i authenticate the clients in cisco router without seperate radius sever.

i tried the following commands only in cisco router.

aaa new-model

username cisco privilege 15 password cisco123

aaa authentication login default local

but authentication is not happening.

andrew.prince — Thu, 03 Sep 2009 10:08:31 GMT

You can configure a username/password using CHAP on the dialermap statement.

create a local username and configure:-

aaa new-model

aaa authentication login default local

aaa authentication login NO_AUTHEN none

aaa authentication ppp default local

As long as the encapsulation you are using on your BRI interface is PPP !!!!

HTH>