topic Re: Changing an Admin User's Password in Network Access Control

Changing an Admin User's Password

jason.williams — Sun, 10 Mar 2019 23:44:22 GMT

I am setting up some Admin users in ACS, but I don't want to give them access to the "Administration Control" section.

How can they change/reset their own passwords? When I create the accounts, I will give them a generic password, but I would like for them to be able to reset it to their own password.

Thanks.

Jason

Re: Changing an Admin User's Password

Collin Clark — Thu, 15 Oct 2009 18:53:15 GMT

Jason-

AFAIK you can't. Why you can't set the login to AAA either baffles me.

Re: Changing an Admin User's Password

tasneemjan — Thu, 15 Oct 2009 21:10:10 GMT

you can use user changable password with acs se or for windows. please look at the following doc:

http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/user_passwords/ucp.html

regrads

Re: Changing an Admin User's Password

Jagdeep Gambhir — Fri, 16 Oct 2009 15:56:52 GMT

UCP is for non-admin users. Admin users cannot change password using UCP.

You use the UCP application to enable users to change their ACS passwords with a web-based utility. When users need to change passwords, they can access the UCP web page by using a supported web browser

Regards,

~JG

Do rate helpful posts