802.1x Query

jain.nitin — Sun, 10 Mar 2019 23:39:05 GMT

Hi, I am implementing 802.1x in my network where I have some avaya switches & some cisco switches. My First question is that how can I implement it on avaya switches.Second how can I configure a cisco switch port on which another cisco switch is connected and its a trunk port.

Can any one explore 802.1x for my scenario. I am also planing to have NAC box. So how will it be integrated in this network.

Re: 802.1x Query

Jatin Katyal — Wed, 19 Aug 2009 21:47:31 GMT

Configuring radius/802.1x on Avaya switch

http://support.avaya.com/elmodocs2/p330/P330/Configuring%20Steel.pdf

configuring 802.1X Port-Based Authentication

http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_8_ea1/configuration/guide/sw8021x.html

You can not configure 802.1x on trunk port as 802.1x is not supported on these port types:

Trunk port

Dynamic-access ports

Dynamic ports

Switched Port Analyzer (SPAN)

Hope this helps.

Regards,

topic 802.1x Query in Network Access Control

802.1x Query

Re: 802.1x Query